Newest Ghost Patrol Rifle Phantom SDU2.0 eSilver Edge it has Super Dynamic Micro Chip Unit with built in programmable Mosfet system that works together with magnet gears set, reinforced piston, quick change spring guide and micro switch trigger that gives you instant trigger response when shooting.

We have 5 different modes at our disposal.
Press and hold the button underneath of the gear box reachable from the magwell of the lower receiver.
You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

Mode 1 - Safe -Semi -Auto (default)
Mode 2 - Safe -Semi -3xBurst
Mode 3 - Safe -2xBurst -Auto
Mode 4 - Safe -3xBurst -Auto
Mode 5 - Safe -3xBurst -9xBurst
Double press the button or disconnect the battery at any time, allows you to reset the ECU back to factory settings (mode 1).

The circuit board of the micro-chip is replaceable, repairing is easy and friendly. The chip is programmed to protect the gearbox when the electric current is too high. This eSilver Edge Gear Box standard comes with full steel teeth piston and ambidextrous design which are rarely seen in the market. Parts are TM compatible, which means further upgrade is available if needs (except for the piston gear).

The eSilver Edge Gear Box works perfectly under 7.4v to 12.5v - LiPo READY! The current are always stable at <11 Amps in any voltages between 7.4V to 12.5V. Low and stable Amps means it drains less battery and the lifespan of the components could last longer. Base on our testing, the response time of the switch is just 0.02 sec. With the short stroke design of the trigger, it is unbelievable fast and you won't feel any trigger delay when shooting.

Ghost Patrol Rifle comes with a sound amplifier flash hider named “Sound Blaster Type A". This sound amplifiers muzzle increase the sound of firing your airsoft gun for an awesome added intimidation factor.
The gun itself was black but we made some parts in green, for example, muzzle, outer barrel, stright trigger and ambi fire selector and charging handle.

The gearbox shell is specially designed for the electric trigger, and it was reinforced at critical points - around the cylinder head and the spring guide.

Key Features of Ghost Patrol Rifle Phantom :

· Quick Change Spring System
· Polished and Buffed surface improves smoothness
· 8mm Ball Bearing, Bearing Piston Head and Bearing Spring Guide used
· TM Compatible Parts-except for the piston gear
· Prevent Corrosion
· Mirco Trigger Switch for instant trigger response
· The Quick Change Spring Guide has 4 locking legs instead of 2 which is different from the existing spring guide found in the market which further secure the spring while shooting
· Build in programmable MOSFET to cut the power when Ampre is too high.
· New Hawk flip up sights and dynamic hand stop,
· Metal Body, Gear Box, Butt Stock and Hand Guard
· Inner barrel size: 6.03mm
· Magazine Hi-Cap : 300bb
· Ambi fire selector and Ambi magazine release

NOTE! Please note that Battery and Charger are not included.
NOTE! We can downgrade to 330 fps (1 Joule) in price. Just write about it in order commentary.